MASTRAİLER TANKER
تم التحقق من هوية التاجر
متوفرة للبيع:
35 إعلانات
3 سنة في Autoline
تم فحص أرقام الهواتف
جديد صهريج نصف مقطورة Mas Trailer Tanker 2024 Carbon steel adr luxury model
PDF
مشاركة
Facebook
WhatsApp
Viber
Telegram
هل أنت مهتم بالإعلان؟
1/21
PDF
مشاركة
Facebook
WhatsApp
Viber
Telegram
السعر:
عند الطلب
تقديم استفسار عن السعر
الاتصال بالبائع
الماركة:
Mas Trailer Tanker
الموديل:
2024 Carbon steel adr luxury model
الفئة:
صهريج نصف مقطورة
سعة:
30000 لتر
الحمولة:
25500 كجم
الوزن الصافي:
7500 كجم
الوزن الإجمالي:
33000 كجم
الموقع:
تركيا KARATAY / KONYA
تاريخ النشر:
٨ يونيو ٢٠٢٤ م
Autoline ID:
WA37753
المواصفات
ارتفاع صينية القطر:
1250 ملم
مقاييس عامة:
10850 متر × 2550 متر × 3750 متر
هيكل
الهيكل (الشاسيه):
من الصلب
صندوق الأدوات:
حامل للعجلة الاحتياطية:
عربة الصهريج
منصات هيدروليكية متنقلة:
عدد الفوهات:
2
ضغط الاختبار:
0.4 bar
عدد الأقسام:
1
سماكة جوانب الصهريج:
4.2 ملم
سمك نهايات الجدران:
4.2 ملم
سماكة الفواصل:
4.2 ملم
محاور
الماركة:
SAF
عدد المحاور:
3
نظام التعليق:
بضغط الهواء/بضغط الهواء
قاعدة العجلات:
1310 ملم
مقاسات الإطارات المطاطية:
385/65/r22,5
الفرامل:
قرصية
الفرامل
نظام الفرامل ذات التحكم الإلكتروني (EBS):
تجهيزات إضافية
ADR:
6.1, 6.2, 8
خدمة تسليم السيارات
حالة المركبة
حالة المركبة:
جديد
معلومات إضافية
اللون:
أبيض
هامة
إن هذا العرض يمكن الحصول من خلاله على المعلومات الأولية فقط. أما التفاصيل المتعلقة، فيرجى الاتصال بالبائع.
نصائح للشراء
معلومات الاتصال بالبائع
الاشتراك بصفحة البائع
عنوان
تركيا, 42050 BÜ, KARATAY / KONYA, FEVZİÇAKMAK MAH. 10662. SK. NO: 19 D
التوقيت المحلي الخاص بالبائع:
05:31 (+03)
إرسال الرسالة
معلومات الاتصال بالبائع
MASTRAİLER TANKER
تركيا
3 سنة في Autoline
4.9
43 مراجعات
الاشتراك بصفحة البائع
+90 542 312...
عرض
+90 542 312 86 28
اسأل البائع
PDF
مشاركة
Facebook
WhatsApp
Viber
Telegram
بيع ماكينات أم مركبات؟
يمكنك القيام بذلك معنا!
إعلانات مماثلة
الاتصال بالبائع
€31,500
USD
SAR
≈ $33,800
≈ SAR 127,000
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
ارتفاع صينية القطر
1250 ملم
سنة
عدد الكيلومترات
حمولة
25500 كجم
تركيا، KARATAY / KONYA
الاتصال بالبائع
€80,000
USD
SAR
≈ $85,830
≈ SAR 322,500
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
ارتفاع صينية القطر
1250 ملم
سنة
عدد الكيلومترات
حمولة
25500 كجم
تركيا، KARATAY / KONYA
الاتصال بالبائع
€60,000
USD
SAR
≈ $64,370
≈ SAR 241,900
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
ارتفاع صينية القطر
1250 ملم
سنة
عدد الكيلومترات
حمولة
25500 كجم
تركيا، KARATAY / KONYA
الاتصال بالبائع
السعر عند الطلب
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
ارتفاع صينية القطر
1250 ملم
سنة
عدد الكيلومترات
حمولة
25500 كجم
تركيا، KARATAY / KONYA
الاتصال بالبائع
€71,500
USD
SAR
≈ $76,710
≈ SAR 288,200
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
ارتفاع صينية القطر
1250 ملم
سنة
عدد الكيلومترات
حمولة
25500 كجم
تركيا، KARATAY / KONYA
الاتصال بالبائع
السعر عند الطلب
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
ارتفاع صينية القطر
1250 ملم
سنة
عدد الكيلومترات
حمولة
25500 كجم
تركيا، KARATAY / KONYA
الاتصال بالبائع
السعر عند الطلب
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
ارتفاع صينية القطر
1250 ملم
سنة
عدد الكيلومترات
حمولة
25500 كجم
تركيا، KARATAY / KONYA
الاتصال بالبائع
السعر عند الطلب
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
ارتفاع صينية القطر
1250 ملم
سنة
عدد الكيلومترات
حمولة
25500 كجم
تركيا، KARATAY / KONYA
الاتصال بالبائع
€33,500
USD
SAR
≈ $35,940
≈ SAR 135,000
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
ارتفاع صينية القطر
1250 ملم
سنة
عدد الكيلومترات
حمولة
25500 كجم
تركيا، KARATAY / KONYA
الاتصال بالبائع
السعر عند الطلب
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
ارتفاع صينية القطر
1250 ملم
سنة
عدد الكيلومترات
حمولة
25500 كجم
تركيا، KARATAY / KONYA
الاتصال بالبائع
€55,000
USD
SAR
≈ $59,010
≈ SAR 221,700
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
ارتفاع صينية القطر
1250 ملم
سنة
عدد الكيلومترات
حمولة
25500 كجم
تركيا، KARATAY / KONYA
الاتصال بالبائع
€40,000
USD
SAR
≈ $42,920
≈ SAR 161,200
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
ارتفاع صينية القطر
1250 ملم
سنة
عدد الكيلومترات
حمولة
25500 كجم
تركيا، KARATAY / KONYA
الاتصال بالبائع
السعر عند الطلب
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
ارتفاع صينية القطر
1250 ملم
سنة
عدد الكيلومترات
حمولة
25500 كجم
تركيا، KARATAY / KONYA
الاتصال بالبائع
€90,000
USD
SAR
≈ $96,560
≈ SAR 362,800
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
ارتفاع صينية القطر
1250 ملم
سنة
عدد الكيلومترات
حمولة
25500 كجم
تركيا، KARATAY / KONYA
DIMENSIONS:
Length: 10850 mm
Width: 2550 mm maximum
Height 3750 mm
Pin - Ground clearance: 1250 mm
CHASSIS AND STRUCTURE:
Chassis: Carbon steel 100x200x5mm box section
Tanker Structure Monoblock
1 & 6 Compartments
Tank capacity between 30.000 lt & 45.000 lt
4.2mm steel
Tanker with ADR
Axles
3 Saf brand axles are used, each with a capacity of 12 tons.
Air suspension.
The front axle is lifted and can be controlled from the driver's cab.
BRAKE SYSTEM:
Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed.
ELECTRICAL SYSTEM:
Aspöck Lighting Systems and Aspöck Bumper
2x7 pin sockets - 24V, lights according to SAE standards.
Rear lights, side marker lights, brake warning lights and signal lights will be installed.
There will be 2 tail and stop combination lights.
2 indicators will be installed.
1 license plate light.
The electrical system complies with European standards and is flame retardant.
PARKING LEGS
OMS brand parking legs
Including telescopic mechanical conveyor
Dynamic lifting capacity : 25 tons
Static lifting capacity : 50 tons
Low gear position : 0.98 mm / RPM
TIRES AND RIMS:
385/65/R22.5 STARMAX PETLAS, ( 6 pcs )
11.75 x 22.5, JANTSA rim (6 pcs)
KING-PIN:
Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate.
PAINTING:
All parts are carefully cleaned before painting.
First protective primer and epoxy is used for painting.
Two coats of high quality paint are applied to the tanker.
The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be considered as an extra cost.
EMCO WHEATON or CİVACON manhole cover:
It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The top plate is connected to the neck plate with sealed gaskets and screws. It is provided with standard connection points for mounting the vapor recycling valve, level sensor, measuring rod and vent.
EMCO WHEATON or CIVACON pneumatic control unit
It is installed inside the tank truck cabinet. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure, it allows the system to operate during filling and emptying of the tank.
EMCO WHEATON or CİVACON submersible valve:
3" standard type bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminium (eteal 171), the gaskets, the Viton spring and the fasteners (inox) are made of chrome nickel and pressure and leak tests have been carried out.
EMCO WHEATON or CİVACON-Api valve:
It is mounted inside the cabinet, each compartment is separate in the tanker. It is used for filling and emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been made.
ACCESSORIES
6 pieces of mudguards
1 wheel chock
1 6 kg fire extinguisher box
1 spare wheel space
1 water tank 30 lt.
1 Folding ladder
Holder for two 3.5 m drain hoses
Note: Please contact us for your production requests in special sizes.
DIMENSIONS:
Length: 10850 mm
Width: 2550 mm maximum
Height 3750 mm
Pin - Ground clearance: 1250 mm
CHASSIS AND STRUCTURE:
Chassis: Carbon steel 100x200x5mm box section
Tanker Structure Monoblock
1 & 6 Compartments
Tank capacity between 30.000 lt & 45.000 lt
4.2mm steel
Tanker with ADR
Axles
3 Saf brand axles are used, each with a capacity of 12 tons.
Air suspension.
The front axle is lifted and can be controlled from the driver's cab.
BRAKE SYSTEM:
Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed.
ELECTRICAL SYSTEM:
Aspöck Lighting Systems and Aspöck Bumper
2x7 pin sockets - 24V, lights according to SAE standards.
Rear lights, side marker lights, brake warning lights and signal lights will be installed.
There will be 2 tail and stop combination lights.
2 indicators will be installed.
1 license plate light.
The electrical system complies with European standards and is flame retardant.
PARKING LEGS
OMS brand parking legs
Including telescopic mechanical conveyor
Dynamic lifting capacity : 25 tons
Static lifting capacity : 50 tons
Low gear position : 0.98 mm / RPM
TIRES AND RIMS:
385/65/R22.5 STARMAX PETLAS, ( 6 pcs )
11.75 x 22.5, JANTSA rim (6 pcs)
KING-PIN:
Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate.
PAINTING:
All parts are carefully cleaned before painting.
First protective primer and epoxy is used for painting.
Two coats of high quality paint are applied to the tanker.
The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be considered as an extra cost.
EMCO WHEATON or CİVACON manhole cover:
It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The top plate is connected to the neck plate with sealed gaskets and screws. It is provided with standard connection points for mounting the vapor recycling valve, level sensor, measuring rod and vent.
EMCO WHEATON or CIVACON pneumatic control unit
It is installed inside the tank truck cabinet. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure, it allows the system to operate during filling and emptying of the tank.
EMCO WHEATON or CİVACON submersible valve:
3" standard type bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminium (eteal 171), the gaskets, the Viton spring and the fasteners (inox) are made of chrome nickel and pressure and leak tests have been carried out.
EMCO WHEATON or CİVACON-Api valve:
It is mounted inside the cabinet, each compartment is separate in the tanker. It is used for filling and emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been made.
ACCESSORIES
6 pieces of mudguards
1 wheel chock
1 6 kg fire extinguisher box
1 spare wheel space
1 water tank 30 lt.
1 Folding ladder
Holder for two 3.5 m drain hoses
Note: Please contact us for your production requests in special sizes.